Key takeaways
- A plate cost is only accurate when it uses edible-portion cost after trim and cooking loss, not the invoice price per pound.
- Food takes roughly 33 cents of every sales dollar at a typical restaurant, so small errors on high-volume plates add up quickly[1].
- Wholesale food prices are up 35% since February 2020, which means many recipe cards written before then understate cost[2].
- Set update triggers: a price change on a key ingredient, a new supplier, or a portion change should all reprice the card.
Why plate cost drifts without anyone noticing
Recipe cards are usually written when a dish launches and then forgotten. Meanwhile the supplier changes the case size, the cook adds a second sauce ramekin, and the price of the protein moves every few weeks. Twelve months later the menu price is the same and the plate cost is not.
Food and labor are each roughly 33 cents of every dollar of sales for a typical restaurant[1], and more than 9 in 10 operators cite food costs among their significant challenges[3]. That makes plate cost one of the few large numbers you can measure precisely, plate by plate, and act on the same week.
The terms that matter on a recipe card
- As-purchased cost: what you pay per unit on the invoice, such as per pound or per case.
- Yield percentage: the usable share left after trimming, peeling, portioning or cooking.
- Edible-portion cost: as-purchased cost divided by yield. This is the number that belongs on the card.
- Sub-recipe: a batch item such as a sauce, dressing or dough, costed once and then used by the ounce or portion.
- Q factor: a small per-plate allowance for things that are hard to measure individually, such as frying oil, salt, ketchup cups and to-go packaging.
- Plate cost: the sum of every component at edible-portion cost plus the Q factor.
How to build a recipe cost card
Write the recipe as the line actually makes it
Watch the dish being plated on a busy shift. Weigh each component. The card should describe what leaves the pass, not what the chef intended at launch.
Run a yield test on each protein and produce item
Weigh the product as delivered, trim and portion it as normal, then weigh the usable result. Repeat with two or three deliveries and use the average.
Cost the sub-recipes first
Price a full batch of each sauce, dressing or base, divide by the batch yield, and record a cost per ounce or per portion.
Add each component at edible-portion cost
Multiply portion weight by edible-portion cost per unit. Include sides, garnish and the bread basket if it goes to every table.
Add the Q factor and total the card
Keep the Q factor small and review it quarterly. If it grows, something on the plate deserves its own line.
Record price, food cost percentage and margin
Divide plate cost by menu price for food cost percentage, and subtract plate cost from price for contribution margin in dollars.
Worked Example: yield on a salmon side
In this fictional Example, a kitchen buys a 10 lb salmon side at $11.20 per pound, a $112.00 invoice line. After skinning, pin-boning and trimming the belly, the usable fillet weighs 7.8 lb, a 78% yield. The edible-portion cost is $11.20 divided by 0.78, or about $14.36 per pound. A 6 oz portion is 0.375 lb, so it costs about $5.39, not the $4.20 a cook would get by using the invoice price.
The gap of about $1.19 per plate in this Example is the most common recipe costing error. Multiply it by a few hundred salmon plates a month and it can hide most of the margin on the dish.
Trim loss and cooking loss are different tests
A yield test for a whole fish or a case of romaine measures trim loss: the weight you throw away before cooking. Roasts, braises and bacon also lose weight in the oven, and that cooking loss belongs on the card too. Weigh a raw batch, cook it exactly as the line does, rest it, then weigh the sliceable or portionable result. If a short rib loses a large share of its raw weight during a braise, the cost per cooked ounce is far higher than the invoice suggests, and the card must use the cooked figure.
Run both tests again whenever you change brand, grade or supplier. Two cases of the same cut from different packers can trim very differently, and the cheaper case per pound is not always the cheaper case per plate.
Example: costing a batch sub-recipe
Sauces and dressings are where small costs pile up because they go on many plates. In this fictional Example, a house sauce batch uses mayonnaise, pickles, mustard, spices and pickle brine with a total ingredient cost of $13.44 and makes 64 oz after mixing. The cost per ounce is $13.44 divided by 64, or $0.21, which is the figure used on the burger card below. If the mayonnaise price rises, you update one sub-recipe and every card that uses the sauce updates with it, which is far easier than editing twenty plates by hand.
Worked Example: a burger cost card
| Component | Portion | Cost basis | Cost per plate |
|---|---|---|---|
| Ground beef blend | 8 oz raw | $5.60 per lb | $2.80 |
| Brioche bun | 1 each | $0.62 each | $0.62 |
| American cheese | 2 slices | $0.18 per slice | $0.36 |
| House sauce (sub-recipe) | 1.5 oz | $0.21 per oz | $0.32 |
| Lettuce, tomato, onion, pickle | as plated | from yield test | $0.28 |
| Fries | 6 oz | $1.45 per lb frozen | $0.54 |
| Q factor | oil, ketchup, paper | quarterly review | $0.35 |
| Total plate cost | full plate | sum of lines | $5.27 |
At a $16.00 menu price in this Example, food cost is about 32.9% and contribution margin is $10.73. Now apply a supplier increase on beef. If the ground beef blend rises 8.7%, in line with the USDA 2026 forecast for beef and veal[4], the patty line goes from $2.80 to about $3.04 and the plate cost to about $5.51. Food cost moves to about 34.4% and margin falls to $10.49 on every burger sold.
Source: National Restaurant Association, 2026[2]
Show the data
| Item | Value |
|---|---|
| Average hourly earnings of restaurant employees | 41% |
| Average wholesale food prices | 35% |
Set update triggers, not an annual chore
Restaurant hourly earnings are up 41% and wholesale food prices 35% since February 2020[2]. Prices that move that much do not wait for an annual review. Reprice a card when any of these happens:
- A key ingredient changes price by more than your chosen threshold on two consecutive invoices.
- You switch suppliers, brands or case packs, which often changes yield as well as price.
- The kitchen changes a portion, garnish or side, even temporarily.
- A dish is added to a third-party menu with different packaging.
- The menu is about to be reprinted or repriced.
Cost every channel, not just the dining room
The same burger costs more to sell for delivery. Clamshells, sauce cups, bags, labels and napkins can add a meaningful amount per order, and platform commissions come on top. Build a separate card, or a separate Q factor, for each channel where the packaging differs: dine-in, takeout, third-party delivery and catering trays. Catering is worth its own attention because portions are often set by the tray rather than by the plate, and a tray that is generously filled for a family order can carry a very different food cost from the same item on the dinner menu. When you price channels from their own cards, the menu engineering grid for each channel tells a truer story.
Who owns the cards
Recipe costing fails when it is everyone's job. Give one person, usually the kitchen manager or a bookkeeper working with the chef, ownership of the card library. Their weekly routine can be short: scan the week's invoices for price changes on the twenty items that drive most of your food spend, update those ingredient prices, and flag any card whose plate cost moved more than your threshold. Once a month, the chef and the manager review the flagged cards together and decide whether to change the price, the portion or the recipe.
Keep the cards honest
- Store cards in one shared place, with the date last costed and the invoice used.
- Spot-check two plates a week against the card using a scale at the pass.
- Compare theoretical food cost from the cards with actual food cost from inventory each period; a widening gap means cards, portions or waste need attention.
- Give the kitchen a photo spec for every plate so the portion on the card matches the portion on the plate.
Accurate cards feed everything else: menu engineering, inventory variance and price decisions all start here.
Frequently asked questions
What is a good food cost percentage for a restaurant?
It depends on concept and price point. Food takes roughly 33 cents of every sales dollar at a typical restaurant[1], but a steakhouse and a pizzeria run very different plate costs. Judge each plate by its contribution margin in dollars as well as its percentage.
What is the difference between as-purchased and edible-portion cost?
As-purchased cost is the invoice price per unit. Edible-portion cost divides that by the yield after trim and cooking loss, which is what you actually serve.
How often should I update recipe costs?
Update a card whenever a key ingredient's price, supplier, pack size or portion changes, and review every card before the menu is repriced or reprinted.
What is a Q factor?
A small per-plate allowance for low-cost items that are impractical to weigh each time, such as oil, condiments and to-go packaging.
References
National Restaurant Association (2026). Restaurants remain resilient despite challenging business conditions (opens in a new tab) ↑
National Restaurant Association (2026). Restaurants remain resilient despite challenging business conditions (opens in a new tab) ↑
National Restaurant Association (2026). Persistent Cost Increases and Enduring Demand Will Shape the Restaurant Industry in 2026 (opens in a new tab) ↑
USDA Economic Research Service (2026). Food Price Outlook - Summary Findings (opens in a new tab) ↑