Metrics, Costs and Finance

Inventory Counts and Variance

Run a weekly inventory count, compare actual with theoretical food cost, read an item variance report and spot signs of waste, portioning or theft.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Why the count matters
  2. The two numbers you compare
  3. How to run a weekly count
  4. Worked Example: reading a variance report
  5. What the patterns usually mean
  6. Respond without accusing anyone
  7. Counting the bar
  8. Use the count to order
  9. Weekly checks, monthly close
  10. Count the expensive items more often
  11. Make the numbers trustworthy
  12. Frequently asked questions
  13. References
Metrics, Costs and Finance: Inventory Counts and VarianceArticle coverMETRICS, COSTS AND FINANCEInventory Counts andVarianceAva for RestaurantsInsightsMetrics, Costs and Finance: Inventory Counts and VarianceArticle coverMETRICS, COSTS AND FINANCEInventory Counts andVarianceAva for Restaurants

Key takeaways

  • Actual cost of goods sold equals opening inventory plus purchases minus closing inventory; count the same way every week to trust it.
  • Theoretical cost comes from POS item sales multiplied by recipe cards; the gap between actual and theoretical is your variance.
  • Food is roughly 33 cents of every sales dollar at a typical restaurant, so even a small variance is real money[1].
  • Count high-value items more often, price the count at current cost and investigate patterns, not single bad weeks.

Why the count matters

You cannot know your real food cost without counting what is on the shelves. Purchases alone tell you what you bought, not what you used. A walk-in that fills up before a holiday makes one week look expensive and the next look cheap; only a count separates buying from using.

The money at stake is large. Food and labor are each roughly 33 cents of every sales dollar at a typical restaurant[1], so food alone is about a third of what comes in. Wholesale food prices are up 35% since February 2020[2], which means the same shelf holds more dollars than it did a few years ago, and every pound that disappears costs more.

Where a restaurant sales dollar goesApproximate shares; food and labor about 33 cents each
Where a restaurant sales dollar goesDonut chart. Food: 33%; Labor: 33%; Everything else and profit: 34%.Food: 33%Labor: 33%Everything else and profit: 34%
  • Food 33%
  • Labor 33%
  • Everything else and profit 34%

Source: National Restaurant Association, 2026[1]

Show the data
ItemValue
Food33%
Labor33%
Everything else and profit34%

The two numbers you compare

Actual cost of goods sold for a period equals opening inventory value plus purchases minus closing inventory value. Divide it by food sales for your actual food cost percentage.

Theoretical cost is what the food should have cost if every plate matched its recipe card. Multiply each item sold in the POS by its plate cost, add them up and divide by food sales. The difference between actual and theoretical is your variance, the share of food that left the building without a matching sale or that was used differently from the card.

How to run a weekly count

  1. Fix the time and day

    Count at the same time each week, ideally after close on the last day of the period and before the next delivery.

  2. Use a count sheet in shelf order

    List items in the order they sit in the walk-in, freezer, dry storage and bar, so counters walk the room once and miss nothing.

  3. Count in the same units every time

    Cases, each, pounds or bottles, matched to the unit on the invoice. Weigh opened product rather than guessing.

  4. Count in pairs

    One person counts, one records. Rotate pairs so the same person does not always count the same area.

  5. Price at current cost

    Use the latest invoice price for each item so the value reflects what you would pay to replace it.

  6. Include work in progress

    Prepped sauces, portioned proteins and par-cooked items have value. Cost them from sub-recipe cards.

  7. Close the period

    Enter the count the same day, calculate actual cost and compare with theoretical before the weekly meeting.

Worked Example: reading a variance report

In this fictional Example, a restaurant's opening inventory was $8,400, purchases were $11,900 and closing inventory was $8,100, so actual cost of goods sold was $12,200. Food sales were $38,500, an actual food cost of about 31.7%. Theoretical cost from the POS and recipe cards was $11,400, about 29.6%. The gap of about 2.1 points, $800 for the week, is the variance to explain.

Example: item variance for a fictional restaurant, one week
ItemTheoretical useActual useOverCost per unitVariance
Ribeye, 14 oz cut62 lb69 lb7 lb$13.50 per lb$94.50
Shrimp, 16/2030 lb36 lb6 lb$9.80 per lb$58.80
Well vodka18 L21 L3 L$14.00 per L$42.00
Heavy cream24 qt31 qt7 qt$3.20 per qt$22.40
Salmon40 lb41.5 lb1.5 lb$12.00 per lb$18.00
Chicken thighs85 lb86 lb1 lb$3.10 per lb$3.10

Four items in this Example explain about $218 of the $800. The rest is spread across many small items, which is common. Start with the large, repeatable variances and work down.

What the patterns usually mean

  • Steady overage on one portioned protein, such as the ribeye: portions cut heavy, trim not recorded, or product leaving through the back door.
  • Overage on an expensive ingredient used in several dishes, such as shrimp: a recipe card that does not match how the line now plates, or a new dish missing from the cards.
  • Liquor overage concentrated on certain shifts: over-pouring, free drinks or unrung sales.
  • Overage on dairy and produce: over-production and spoilage more often than theft. Check the waste log.
  • A sudden variance that reverses next week: usually a counting or invoice error, such as a delivery entered in the wrong week.
  • Negative variance, where actual use is lower than theoretical: portions cut light, cards that overstate the recipe, or sales rung for items that were never made.

Respond without accusing anyone

When a pattern repeats, investigate the process before the people. Weigh ten portions at the pass during a busy shift. Compare the recipe card with what the line actually builds. Check that waste is being logged, that comps and staff meals are rung in, and that every delivery is checked against its invoice. If the gap remains after those checks and points to one area or shift, tighten controls there: locked storage, sign-out sheets for high-value items, and a second person at receiving. Treat the variance report as a tool for the whole team, not a list of suspects.

Counting the bar

Liquor, beer and wine need their own routine because opened bottles are hard to count by eye. Weigh open bottles on a scale and convert to tenths or ounces, or use a consistent visual tenths method if a scale is not practical. Count kegs by weight as well. Compare usage with POS sales by product, not just by category, so a heavy pour on one spirit stands out. Count the bar at the same time as the kitchen so that transfers, such as cream or citrus taken from the kitchen for cocktails, are recorded in one place.

Use the count to order

A good count does double duty. Set a par level for each item, the quantity you want on hand after a delivery, based on usage between deliveries plus a small buffer. After the count, order the difference between par and what is on the shelf. This keeps the walk-in lean, reduces spoilage and makes the next count faster. Review pars when the menu changes or when sales shift with the season, since a par set for summer volume overfills the walk-in in a slow month.

Weekly checks, monthly close

The weekly count drives decisions; the monthly count closes the books. Your bookkeeper needs a full, priced inventory on the last day of each month to calculate cost of goods sold on the profit and loss statement. If the weekly count falls on a different day, do a full count at month end as well, or align your weekly periods to the calendar month. Keep the count sheets with the month's invoices so the numbers can be checked later.

Count the expensive items more often

A full weekly count can take a couple of hours. You do not need to count every spice daily, but you should count a short list of high-value items much more often. Rank items by the dollars you spend on them; the top group, often proteins, seafood and premium spirits, usually accounts for most of your food and beverage spend. Count those daily or at every shift change, and count the rest weekly. Proteins also face the sharpest price moves; USDA forecasts beef and veal prices to rise 8.7% in 2026[3], so a daily ribeye count protects a fast-growing cost line.

Make the numbers trustworthy

  • Keep one count sheet template and change it only when the menu changes.
  • Record deliveries the day they arrive, not the day the invoice is paid.
  • Log transfers between kitchen and bar, and between locations if you have more than one.
  • Ring every comp, staff meal and tasting through the POS so theoretical cost includes them.
  • Review recipe cards whenever a dish changes; a stale card creates a variance that is really a paperwork error.

More than 9 in 10 operators cite food costs among their significant challenges[4]. A reliable count is the cheapest control you have, and it feeds your KPI scorecard, your waste reduction work and your ordering.

Frequently asked questions

How do I calculate restaurant food cost from inventory?

Add opening inventory value and purchases, subtract closing inventory value, and divide the result by food sales for the period.

What is theoretical food cost?

The cost your food should have been based on what you sold. Multiply each item sold by its recipe card cost and add the results.

How often should a restaurant count inventory?

Count everything weekly at the same time and count high-value items such as proteins, seafood and premium spirits daily or at each shift change.

What is an acceptable inventory variance?

It depends on your concept and how accurate your recipe cards are. Track the trend and investigate any item whose variance repeats or grows.

References

  1. National Restaurant Association (2026). Restaurants remain resilient despite challenging business conditions (opens in a new tab) ↑

  2. National Restaurant Association (2026). Restaurants remain resilient despite challenging business conditions (opens in a new tab) ↑

  3. USDA Economic Research Service (2026). Food Price Outlook - Summary Findings (opens in a new tab) ↑

  4. National Restaurant Association (2026). Persistent Cost Increases and Enduring Demand Will Shape the Restaurant Industry in 2026 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo