Metrics, Costs and Finance

Restaurant Utility Costs and Energy Savings

Find the biggest energy users in a restaurant kitchen, cut waste with low-cost habits, judge equipment upgrades by payback and look for utility rebates.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Why utilities deserve a monthly look
  2. Where the energy goes
  3. Read your utility bill
  4. A one-week energy walk
  5. Low-cost habits that cut bills
  6. When to replace equipment
  7. Worked Example: simple payback
  8. Rebates, programs and financing
  9. Water is a utility too
  10. A refrigeration maintenance routine
  11. Make it stick
  12. Frequently asked questions
  13. References
Metrics, Costs and Finance: Restaurant Utility Costs and Energy SavingsArticle coverMETRICS, COSTS AND FINANCERestaurant UtilityCosts and EnergySavingsAva for RestaurantsInsightsMetrics, Costs and Finance: Restaurant Utility Costs and Energy SavingsArticle coverMETRICS, COSTS AND FINANCERestaurant UtilityCosts and EnergySavingsAva for Restaurants

Key takeaways

  • Energy is one of the cost pressures more than 9 in 10 operators call a significant challenge[1].
  • Start with habits that cost nothing: equipment start-up schedules, idle shutdowns, hood control and refrigeration maintenance.
  • A kitchen fitted with ENERGY STAR certified equipment could save about $4,000 a year, according to ENERGY STAR[2].
  • Judge upgrades by simple payback, and ask your utility about rebates before you buy.

Why utilities deserve a monthly look

Utilities rarely get the attention food and labor do, but they are a steady cost that rises with every rate change and every piece of equipment left running. More than 9 in 10 restaurant operators cite food, labor, insurance, energy and swipe fees as significant challenges[1]. Unlike rent, energy use responds to daily habits, so a kitchen that changes how it starts up, idles and closes can lower its bills within a month.

Track utilities as a share of sales every month and compare each month with the same month last year. Sales and energy both rise in busy seasons, but if the share climbs while sales hold steady, something has changed: a rate increase, a failing compressor, a new piece of equipment or a habit that slipped.

Where the energy goes

  • Cooking equipment: fryers, griddles, ranges, ovens, broilers and steamers, many of which sit at temperature for hours between rushes.
  • Ventilation: exhaust hoods and the make-up air that replaces what they pull out, which must be heated or cooled.
  • Refrigeration: walk-ins, reach-ins and ice machines running all day, every day.
  • Hot water: dishwashing, pre-rinse, hand sinks and cleaning, usually heated by gas.
  • Heating and cooling for the dining room, often fighting heat from the kitchen.
  • Lighting, inside and outside, including signs.

Cooking, ventilation and refrigeration are where most kitchens find the biggest savings, because they run longest and hottest.

Read your utility bill

Before changing anything, learn what you are charged for. Electricity bills for commercial accounts often include energy charges for the kilowatt-hours you use and a demand charge based on your highest usage in a short window during the month. Some rates also charge more at peak times of day. Gas bills charge for therms used plus fixed fees. Water and sewer bills may be linked, so every gallon of hot water costs three ways: water, sewer and the gas to heat it. Ask your utility account representative which rate you are on, whether another rate would suit your hours better, and whether they offer a free energy assessment for food service customers.

A one-week energy walk

  1. Map start-up times

    For one week, note when each piece of equipment is turned on and when it is first used. The gap is wasted energy.

  2. Check idle time

    Note which equipment sits at temperature between lunch and dinner with nothing cooking.

  3. Watch the hoods

    Record when hoods run at full speed and whether anything is cooking under them.

  4. Inspect refrigeration

    Check door gaskets, strip curtains, door closers, condenser coils and evaporator fans on every unit.

  5. Look for hot water waste

    Find dripping faucets, a pre-rinse valve that runs constantly and dish machines run half empty.

  6. Write a start-up and shut-down schedule

    Post a simple chart at the line showing when each item goes on and off.

Low-cost habits that cut bills

  • Stagger equipment start-up so only what is needed for the first orders comes on at opening.
  • Turn off or turn down fryers, griddles and ovens during slow periods, or consolidate cooking onto fewer units.
  • Run hoods at low speed when nothing is cooking, if your system allows it, and ask about demand-controlled ventilation for older systems.
  • Keep walk-in doors closed, fix torn strip curtains and replace worn gaskets.
  • Clean condenser coils on a regular schedule; dirty coils make compressors work harder and fail sooner.
  • Fix hot water leaks quickly and use a low-flow pre-rinse spray valve.
  • Run the dishwasher only with full racks.
  • Switch to LED lighting and put storage areas and restrooms on sensors.
  • Set dining room thermostats to a schedule and lock them.
  • Book regular maintenance for refrigeration, HVAC and cooking equipment, and keep the service log.

When to replace equipment

Older equipment is often the biggest energy user in the building. When a unit needs replacing, compare models on lifetime cost, not purchase price. ENERGY STAR estimates that a kitchen outfitted with its certified commercial food service equipment could save operators about 350 MMBTU a year, or about $4,000 a year[2].

The savings vary by unit. ENERGY STAR certified electric fryers are about 17% more energy efficient than standard models and can save about $400 a year, while certified gas fryers are about 30% more efficient and can save about $560 a year[3]. Certified steam cookers are about 55% more energy efficient than standard models, cut water use by 90% or more compared with standard models, and save about $820 a year for electric models and $780 for gas[4].

Estimated annual savings from ENERGY STAR certified kitchen equipmentPer unit versus a standard model; fryer figures from ENERGY STAR fryer guidance
Estimated annual savings from ENERGY STAR certified kitchen equipmentBar chart. Steam cooker, electric: $820; Steam cooker, gas: $780; Fryer, gas: $560; Fryer, electric: $400.Steam cooker, electricSteam cooker, electric: $820$820Steam cooker, gasSteam cooker, gas: $780$780Fryer, gasFryer, gas: $560$560Fryer, electricFryer, electric: $400$400Estimated annual savings from ENERGY STAR certified kitchen equipmentBar chart. Steam cooker, electric: $820; Steam cooker, gas: $780; Fryer, gas: $560; Fryer, electric: $400.Steam cooker, electricSteam cooker, electric: $820$820Steam cooker, gasSteam cooker, gas: $780$780Fryer, gasFryer, gas: $560$560Fryer, electricFryer, electric: $400$400

Source: ENERGY STAR, US Environmental Protection Agency, 2026[4]

Show the data
ItemValue
Steam cooker, electric$820
Steam cooker, gas$780
Fryer, gas$560
Fryer, electric$400

Worked Example: simple payback

Simple payback is the extra purchase cost divided by the annual saving. In this fictional Example, a certified gas fryer costs $1,500 more than a standard model. Using the ENERGY STAR estimate of about $560 a year in savings, payback is about 2.7 years. A certified electric steam cooker that costs $2,500 more and saves about $820 a year pays back in about 3.0 years, and it also cuts water and sewer use. Both units usually last far longer than their payback period, so in this Example both are sound choices, especially if a utility rebate lowers the extra cost.

Example: simple payback on two equipment upgrades, using ENERGY STAR savings estimates
EquipmentExtra cost, ExampleAnnual saving estimateSimple payback
Gas fryer, standard vat$1,500about $560about 2.7 years
Electric steam cooker$2,500about $820about 3.0 years

Rebates, programs and financing

Many electric and gas utilities offer rebates for certified commercial kitchen equipment, LED lighting, refrigeration controls and efficient HVAC, and some offer free assessments for restaurants. Check before you buy, because many programs require pre-approval or purchase from a participating dealer. Ask whether your utility offers on-bill financing, which lets you repay an upgrade through your monthly bill. If you are replacing several units, ask your equipment dealer to price certified models and to help with the rebate paperwork. Keep invoices and rebate documents for your accountant, since equipment purchases also affect depreciation on your tax return.

Water is a utility too

Water and sewer charges often appear on a separate bill and get less attention than energy, yet restaurants use a great deal of water for dishwashing, cooking, ice and cleaning. A leaking faucet, a toilet that runs, an ice machine with a faulty valve or a pre-rinse sprayer left on can add up quietly over a month. Check the water meter after close when nothing should be running; if it moves, something is leaking. Water-efficient dish machines and spray valves save water, sewer charges and the gas to heat it at the same time, which is why they are often among the fastest paybacks in the kitchen.

A refrigeration maintenance routine

Refrigeration runs every hour of the year, so small faults cost a lot. Check door gaskets for tears and gaps monthly and replace them as soon as they fail. Clean condenser coils on the schedule your service company recommends, more often in a greasy or dusty location. Keep walk-in evaporator fans clear and do not block airflow with stacked cases. Log temperatures twice a day; a unit that drifts warmer is often the first sign of a failing part. A planned service visit costs far less than an emergency call and a walk-in full of lost product.

Make it stick

Habits fade unless someone owns them. Give the opening and closing managers the start-up and shut-down chart, add the energy checks to the closing checklist and review the utility bills monthly with your other KPIs. Food and labor each take roughly 33 cents of every sales dollar[5], which leaves little room for costs that can be cut with a switch and a schedule.

Frequently asked questions

What uses the most energy in a restaurant?

Cooking equipment, ventilation and refrigeration usually top the list because they run for long hours at high loads. Hot water for dishwashing and cleaning is another large user.

How can a restaurant lower its electric bill quickly?

Stagger equipment start-up, turn off idle equipment between rushes, run hoods at low speed when not cooking, fix refrigeration gaskets and clean condenser coils.

Is ENERGY STAR kitchen equipment worth it?

Often. ENERGY STAR estimates a fully certified kitchen could save about $4,000 a year[2]. Compare the extra cost with the annual saving and check for utility rebates.

Do utilities offer rebates for restaurant equipment?

Many do, for certified cooking equipment, refrigeration, lighting and HVAC. Check your utility's business programs before buying, since some require pre-approval.

References

  1. National Restaurant Association (2026). Persistent Cost Increases and Enduring Demand Will Shape the Restaurant Industry in 2026 (opens in a new tab) ↑

  2. ENERGY STAR, US Environmental Protection Agency (2026). Commercial Food Service Equipment (opens in a new tab) ↑

  3. ENERGY STAR, US Environmental Protection Agency (2026). Commercial Fryers (opens in a new tab) ↑

  4. ENERGY STAR, US Environmental Protection Agency (2026). Commercial Steam Cookers (opens in a new tab) ↑

  5. National Restaurant Association (2026). Restaurants remain resilient despite challenging business conditions (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo