Seasonal Operations and Holidays

Restaurant Preventive Maintenance Calendar

Build a restaurant preventive maintenance calendar: daily to annual tasks, fire safety intervals, vendor contracts and timing big jobs into slow weeks.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. Why breakdowns always happen on Saturday
  2. The calendar by frequency
  3. Checklists staff will actually use
  4. Fire safety intervals you cannot skip
  5. Build your own calendar in six steps
  6. Contracts and contractors
  7. Warning signs to report the same day
  8. Budget for it
  9. Repair, replace or upgrade
  10. Example: a 100-seat restaurant's maintenance year
  11. Frequently asked questions
  12. References
Seasonal Operations and Holidays: Restaurant Preventive Maintenance CalendarArticle coverSEASONAL OPERATIONS AND HOLIDAYSRestaurant PreventiveMaintenance CalendarAva for RestaurantsInsightsSeasonal Operations and Holidays: Restaurant Preventive Maintenance CalendarArticle coverSEASONAL OPERATIONS AND HOLIDAYSRestaurant PreventiveMaintenance CalendarAva for Restaurants

Key takeaways

  • OSHA requires portable fire extinguishers to be visually inspected monthly and maintained annually[1].
  • More than 9 in 10 operators call energy one of their significant cost challenges[2]; clean coils and seals cut waste.
  • Book big jobs into your slowest weeks; nationally January has the lowest sales per day[3].
  • Every task needs a frequency, an owner and a log, or it will slip.

Why breakdowns always happen on Saturday

Equipment fails under load. A walk-in compressor that has struggled all week gives up on the hottest Saturday in July; a dish machine with scale build-up stops in the middle of Mother's Day brunch. Emergency call-outs cost more, parts take longer, and lost service on a peak night can wipe out a week's margin. With 42% of operators reporting that their restaurant was not profitable in 2025[4], few can absorb that.

Preventive maintenance moves those failures, or most of them, to a time you choose. It also cuts running costs. More than 9 in 10 operators cite food, labor, insurance, energy and swipe fees as significant challenges[2], and dirty condenser coils, worn door gaskets and clogged filters all make equipment use more energy than it should.

The calendar by frequency

A starting calendar; your equipment manuals, local fire code and health code set the actual frequencies
FrequencyTasksUsual owner
DailyClean hood filters or check them for grease build-up; clean fryers and filter oil; check refrigeration temperatures and log them; clean the dish machine and check wash and rinse temperatures; empty and clean grease traps or interceptors on the schedule your local rules setLine cooks, dishwasher, opening manager
WeeklyDeep clean fryers and boil out as the manufacturer recommends; descale steam equipment where needed; check door gaskets and hinges on refrigeration; clean drains and floor sinks; check first aid kitKitchen manager
MonthlyVisual inspection of portable fire extinguishers[1]; clean refrigeration condenser coils if the manufacturer advises it; check emergency lights and exit signs; test GFCI outlets; clean ice machine as the manufacturer recommendsManager on duty
QuarterlyHood and duct cleaning by a contractor on the frequency your fire code sets for your cooking volume; HVAC filter change; pest control service review; calibrate thermometers and scalesGeneral manager with contractors
Twice a yearFire suppression system inspection by a licensed contractor where your code requires it; HVAC service before summer and winter; refrigeration service and refrigerant checkGeneral manager with contractors
AnnuallyFire extinguisher maintenance check and record[1]; staff fire extinguisher training[1]; backflow preventer test where required; roof and gutter inspection; full equipment review and replacement planOwner or general manager

Treat the table as a template. Manufacturers' manuals set cleaning and service intervals for each piece of equipment, and your fire marshal, health department and insurer may require specific frequencies. Where they differ, use the strictest.

Checklists staff will actually use

Daily and weekly tasks fail when they live in a binder in the office. Put a short checklist at each station, no more than eight lines, with a box for each day and a space for initials. Write each line as an action with a standard, such as clean fryer filter and check oil color, not as a vague reminder like fryer maintenance. Review the sheets weekly, and when a line is skipped repeatedly, ask why: the task may be in the wrong shift, need a tool the station lacks, or take longer than anyone allowed for.

Train every new hire on the checklist for their station in their first week, and include the reason behind each task. A cook who knows that a dirty condenser coil makes the walk-in work harder on a hot night is more likely to report a noisy compressor early.

Fire safety intervals you cannot skip

OSHA's portable fire extinguisher standard requires extinguishers to be visually inspected monthly and to receive an annual maintenance check, with the date recorded and the record kept for a year after the last entry or the life of the shell, whichever is less. Stored-pressure dry chemical extinguishers that need a 12-year hydrostatic test must also be emptied and maintained every 6 years. Employers must train employees on extinguisher use when they are hired and at least annually after that[1].

Portable fire extinguisher intervals under OSHA29 CFR 1910.157; the 6- and 12-year intervals apply to stored-pressure dry chemical extinguishers
Portable fire extinguisher intervals under OSHABar chart. Visual inspection: 1 months; Maintenance check: 12 months; Empty and maintain: 72 months; Hydrostatic test: 144 months.Visual inspectionVisual inspection: 1 months1 monthsMaintenance checkMaintenance check: 12 months12 monthsEmpty and maintainEmpty and maintain: 72 months72 monthsHydrostatic testHydrostatic test: 144 months144 monthsPortable fire extinguisher intervals under OSHABar chart. Visual inspection: 1 months; Maintenance check: 12 months; Empty and maintain: 72 months; Hydrostatic test: 144 months.Visual inspectionVisual inspection: 1 months1 monthsMaintenance checkMaintenance check: 12 months12 monthsEmpty and maintainEmpty and maintain: 72 months72 monthsHydrostatic testHydrostatic test: 144 months144 months

Source: Occupational Safety and Health Administration, 2026[1]

Show the data
RequirementInterval (months)
Visual inspection1 months
Maintenance check12 months
Empty and maintain72 months
Hydrostatic test144 months

Hood and duct cleaning and kitchen fire suppression systems are set by your local fire code and insurer, usually based on NFPA standards, and the required frequency depends on what and how much you cook. Ask your fire marshal or a certified hood cleaner what applies to your kitchen, and keep every service tag and report.

Build your own calendar in six steps

  1. List every piece of equipment

    Walk the kitchen, bar and building. Record make, model, serial number, install date and warranty for each item, from the walk-in to the ice machine to the water heater.

  2. Collect the manuals

    Download manuals for every item and note the maintenance intervals they recommend. Keep digital copies in one shared folder.

  3. Add the legal and insurance requirements

    Fire extinguishers, suppression systems, hood cleaning, backflow testing, grease interceptors, elevator or boiler inspections if you have them. Note who must do each one.

  4. Place the big jobs in slow weeks

    Hood cleaning, refrigeration service, deep cleans and repairs go into your quietest weeks and closed days. Nationally, January is the weakest month per day, at about $2.48 billion of restaurant sales a day in 2025 against $2.99 billion in May[3].

  5. Assign an owner to every task

    Daily and weekly tasks belong to named roles; contractor jobs belong to the manager who books and checks them.

  6. Keep a log

    Record each task with date, initials and any problem found. A log shows inspectors and insurers that maintenance happens, and shows you which equipment is failing more often.

Contracts and contractors

  • Bundle refrigeration, HVAC and kitchen equipment service into planned maintenance contracts where it saves money, and agree response times for emergencies.
  • Ask each contractor for a written report after every visit, with photos for hood cleaning and suppression checks.
  • Book recurring visits for the same weeks every year so they never land on a holiday.
  • Keep a list of backup contractors for refrigeration and plumbing; your regular firm may be busy on the day you need them.
  • Check insurance and licenses for anyone working on gas, electrical or fire systems.

Before signing a service contract, ask what is included: parts or labor only, how many visits, what counts as an emergency and what response time is guaranteed. Compare the contract's annual cost with what you spent on call-outs for that equipment over the past two years, and renegotiate if the numbers do not justify it.

Warning signs to report the same day

  • Refrigeration: temperatures creeping up during service, ice on evaporator coils, a compressor running constantly or short-cycling, water on the floor.
  • Cooking equipment: uneven flames, slow recovery after loading, pilot lights that go out, unusual gas smells, which mean shut off and call the gas utility.
  • Fryers: oil that darkens quickly, thermostats that overshoot, slow heat recovery.
  • Dish machine: wash or rinse temperatures below the machine's data plate, spotty glassware, leaks.
  • Building: water stains on ceilings, slow drains, flickering lights, breakers that trip, a smell of burning from electrical panels or hood motors.

Give staff one simple rule: if it looks, sounds or smells wrong, tell the manager on duty before the end of the shift, and write it in the log. Small faults reported early are cheap to fix.

Budget for it

Put maintenance in the annual budget as its own line, split into planned contracts, expected repairs and a replacement reserve for major equipment. Review actual spend against the budget each quarter, alongside the log. If one item keeps appearing in both, it belongs on the replacement plan. Planned maintenance is easier to fund than emergencies because you know when the bills will come, and you can time them for months when cash is strongest.

Repair, replace or upgrade

Once a year, review each major item. If repair costs are rising, the item is near the end of its expected life, or parts are hard to find, plan its replacement for a slow week rather than waiting for failure. When you replace, compare running costs as well as purchase price. ENERGY STAR estimates that a full suite of its certified commercial kitchen equipment could save operators about 350 MMBTU a year, or about $4,000 a year[5]. Your savings depend on what you replace and how much you cook, but energy use is part of the real price of every appliance.

Example: a 100-seat restaurant's maintenance year

Example (fictional). A 100-seat restaurant lists 42 pieces of equipment and builds its calendar from the manuals and its fire marshal's requirements. Daily and weekly tasks go on laminated checklists by station. Extinguishers are checked on the first Monday of each month by the opening manager. Hood cleaning is booked for the second week of January and the second week of July, refrigeration service for March and September, and HVAC service in April and October. The walk-in compressor, now 11 years old, is scheduled for replacement during the January closure. After a year, emergency call-outs fall and the log shows the ice machine needs more frequent cleaning than the manual suggests. Details are illustrative only.

Frequently asked questions

How often should restaurant fire extinguishers be inspected?

OSHA requires a visual inspection every month and a maintenance check every year, with the date recorded[1]. Your local fire code may add requirements.

How often should a restaurant hood be cleaned?

It depends on your cooking volume and fuel, and the frequency is set by your local fire code and insurer, usually based on NFPA standards. Ask your fire marshal or a certified hood cleaning contractor and keep every service report.

When should I schedule big maintenance jobs?

In your slowest weeks or on closed days. Nationally, January has the lowest restaurant sales per day[3], which is why many restaurants book deep cleaning and repairs then.

References

  1. Occupational Safety and Health Administration (2026). 29 CFR 1910.157: Portable fire extinguishers (opens in a new tab) ↑

  2. National Restaurant Association (2026). Persistent Cost Increases and Enduring Demand Will Shape the Restaurant Industry in 2026 (opens in a new tab) ↑

  3. US Census Bureau (2025). Monthly Retail Trade: Estimates of Monthly Retail and Food Services Sales by Kind of Business (1992-present) (opens in a new tab) ↑

  4. National Restaurant Association (2025). Persistent Cost Increases and Enduring Demand Will Shape the Restaurant Industry in 2026 (opens in a new tab) ↑

  5. ENERGY STAR (US Environmental Protection Agency) (2026). Commercial Food Service Equipment (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo