Restaurant Technology and AI

Kitchen Display Systems vs Ticket Printers

Kitchen display systems vs ticket printers compared on speed, routing, ticket-time data and failure modes, with decision rules and a rollout plan.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing6 min read

On this page
  1. The question behind the hardware
  2. Side by side
  3. The data argument
  4. Allergies and modifications
  5. Off-premises orders on the line
  6. Hardware that survives a kitchen
  7. Plan for failure before you choose
  8. How to decide
  9. A rollout that the line will accept
  10. Frequently asked questions
  11. References
Restaurant Technology and AI: Kitchen Display Systems vs Ticket PrintersArticle coverRESTAURANT TECHNOLOGY AND AIKitchen Display Systemsvs Ticket PrintersAva for RestaurantsInsightsRestaurant Technology and AI: Kitchen Display Systems vs Ticket PrintersArticle coverRESTAURANT TECHNOLOGY AND AIKitchen DisplaySystems vs TicketPrintersAva for Restaurants

Key takeaways

  • Printers are cheap, simple and familiar; kitchen displays add routing, timing and live order changes.
  • Ticket-time data is the main reason to switch: you can only fix the station you can measure.
  • Plan for failure either way: paper runs out and screens go dark; decide the fallback before the rush.
  • Off-premises growth makes routing and order-ready signals more valuable[1].

The question behind the hardware

Every kitchen needs a reliable way to turn an order into a cook's next task. Ticket printers have done this for decades: an order prints at the right station, a cook reads it, the expo spikes it. Kitchen display systems, usually called KDS, put the same tickets on screens, with colors, timers and bump buttons. The real question is not paper versus screens. It is how much routing, timing and coordination your kitchen needs, and how you keep cooking when the technology fails.

The pressure on kitchens has changed. Off-premises now accounts for a larger share of sales than in 2019 for 58 percent of limited-service and 41 percent of full-service operators[1]. More tickets come from online ordering and delivery apps, often timed for pickup, mixed with dine-in courses. And guests are impatient: 94 percent of consumers say speed is critical when ordering off-premises[2].

Operators whose off-premises share of sales is larger than in 2019
Operators whose off-premises share of sales is larger than in 2019Comparison. Limited-service: 58%; Full-service: 41%.58%Limited-serviceLimited-service: 58%41%Full-serviceFull-service: 41%Operators whose off-premises share of sales is larger than in 2019Comparison. Limited-service: 58%; Full-service: 41%.58%Limited-serviceLimited-service: 58%41%Full-serviceFull-service: 41%

Source: National Restaurant Association, 2025[1]

Show the data
ItemValue
Limited-service58%
Full-service41%

Side by side

Ticket printers vs kitchen displays. A hybrid, with screens on the line and a printer at expo or for backup, is common.
FactorTicket printersKitchen display system
Upfront costLow: printers and paperHigher: screens, mounts, controllers, software per screen
RoutingPrints the items for each station; changes print as new ticketsShows items by station, with modifications updated on the same ticket
TimingNone, unless someone writes times by handTimers per ticket and station, with color changes as tickets age
Ticket-time dataNoneAverage and peak ticket times by station, daypart and item
Course and fire controlSeparate tickets or verbal callsHold and fire by course, with expo seeing all stations
Off-premisesSeparate printer or a label on the ticketOrder type, promised time and ready signal to front of house or guests
EnvironmentHeat and grease jam printers; thermal paper fades near heatScreens need mounts, splash protection and cleaning
When it failsPaper out, jams, network dropScreen, controller or network failure; needs a printer or backup screen
TrainingAlmost noneA few shifts to trust it; bump discipline matters

The biggest practical difference is order changes. With printers, a modification after firing prints as a new slip that a cook must match to the old one; with a display, the original ticket updates and flags the change. In a busy kitchen, that alone can remove a category of mistakes.

The data argument

A KDS turns the kitchen into something you can measure. You can see ticket times by station and hour, which items slow the line, and how long finished food waits at the pass. Those numbers are hard to get any other way.

  • Average and 90th-percentile ticket time by station and daypart, so you see the slow Saturday hour, not just a daily average.
  • Item-level prep times, which tell you which dishes cause the bottleneck and which might need prep changes or a menu rethink.
  • Time from "ready" to "picked up" for off-premises orders, which shows whether the problem is the kitchen or the handoff.
  • Bump discipline per station, because the data is only as good as cooks bumping tickets when the food goes.

Labor makes this worth doing. Food and labor each take roughly 33 cents of every sales dollar[3], and restaurant cooks earned a median of $17.98 an hour in May 2025[4]. Knowing that the grill station is the bottleneck between 7 and 8 p.m. lets you add a cook for one hour instead of guessing and staffing a whole shift.

Allergies and modifications

Allergy information has to reach the cook clearly every time. When federal allergen labeling law passed, eight major allergens accounted for 90 percent of US food allergies and serious allergic reactions[5]. Whatever system you use, test how an allergy note appears.

  • On printers, make allergy modifiers print in large or inverted text at the top of the item, not as the last line.
  • On displays, use a distinct color and icon for allergy tickets, and require expo to confirm before the ticket can be bumped.
  • Never rely on the system alone. Keep the verbal call between server, expo and cook for allergy orders.

Off-premises orders on the line

Pickup and delivery orders behave differently from dine-in tickets. They arrive in bursts from several channels, carry a promised time rather than a course, and need packaging, labels and a handoff. A kitchen that treats them as ordinary tickets usually cooks them too early, so food sits, or too late, so drivers and guests wait at the counter.

  • Show the order type and promised pickup time at the top of every off-premises ticket, on paper or screen.
  • Hold scheduled orders until a set number of minutes before the promised time, rather than firing on arrival.
  • Give packaging its own station view or printer, with a checklist of sauces, cutlery and drinks for each order.
  • Send a ready signal to the counter or the guest when the bag is sealed, not when the food leaves the line.
  • Throttle online orders on busy nights so the kitchen is not buried by a burst from three apps at once.

This is where displays often earn their cost. A screen can sort tickets by promised time and show expo how many pickup orders are due in the next ten minutes; a printer can only print them in the order they arrived.

Hardware that survives a kitchen

Kitchens are hot, wet and greasy, and both printers and screens fail early when they are bought for an office. Specify the environment before you buy.

  • Printers: kitchen-rated impact printers near heat, because thermal paper darkens and fades near grills and fryers; thermal is fine at cooler stations.
  • Screens: mounted at eye level, away from steam, with splash protection and a bump bar or touch target large enough for gloved hands.
  • Cables and network: wired connections where possible, labelled at both ends, with the switch somewhere cool and out of the way.
  • Spares: one spare printer or screen in the office, configured and ready, so a failure is a swap rather than a service call.

Plan for failure before you choose

Both systems fail. The difference is how they fail and what your team does next.

Common failures and fallbacks. The fallback only works if staff have practiced it.
FailurePrinters: what happensKDS: what happensFallback to plan
Internet outageUsually keeps printing if the POS and printers are on the local networkKeeps working if the POS has a local hub; check that it doesTest offline ordering to the kitchen during the demo
Local network or switch failureNothing printsScreens go blank or freezeA spare switch and a labelled cable plan; handwritten tickets
Device failureOne station stops printing; route to another printerOne screen goes dark; route its station to another screenConfigure re-routing in advance and train the closing manager
Power cutEverything stopsEverything stopsA small battery backup on the network gear and POS
Paper or suppliesPaper runs out mid-rushNot applicableLow-paper check at line-up; spare rolls at each printer

Keep a stack of pre-printed paper tickets at every station for the worst case, and practice a five-minute "paper service" drill once a quarter.

Ask any KDS vendor three questions in writing: whether the screens keep receiving orders from the POS on the local network without internet, how a failed screen's tickets are re-routed and by whom, and whether a printer can be added as an automatic backup for any station. If the answers are vague, run the test yourself before signing.

How to decide

  1. Stay with printers if your menu is small, you run one or two stations, ticket volume is steady and the team is happy. Upgrade printers to kitchen-rated models and fix routing first.
  2. Move to a KDS if you run several stations or courses, handle a large share of off-premises orders, get frequent modification errors, or want ticket-time data to schedule labor.
  3. Choose a hybrid if you want screens on the line but a printed ticket at expo or for packaging labels, or as a built-in backup.
  4. In every case, confirm the system keeps tickets flowing to the kitchen when the internet drops.

A rollout that the line will accept

  1. Start with one station

    Put a screen on the busiest station and keep its printer running in parallel for a week.

  2. Set the timers with cooks

    Agree the target ticket time and the yellow and red thresholds with the people on the line.

  3. Train bump discipline

    Bump when food leaves the station, not when it is started. Data depends on it.

  4. Move expo last

    Once stations trust the screens, give expo the all-stations view and course control.

  5. Review data weekly

    Look at ticket times by hour with the chef and adjust prep, staffing or the menu.

Example: a fictional 120-seat restaurant with a large pickup business moves its grill and fry stations to screens and keeps a printer at expo for bag labels. After four weeks, the chef sees that pickup orders wait longest between ready and handoff, not on the line, and moves one front-of-house team member to the pickup shelf during the dinner rush. The Example shows the most common surprise: the data often points outside the kitchen.

Frequently asked questions

Is a kitchen display system faster than tickets?

Often, because changes update on the same ticket and timers show which orders are aging. The bigger benefit is measurement: ticket times by station and hour.

What happens to a KDS when the internet goes down?

It depends on the system. Many keep working on the local network through a hub; check this in the demo by disconnecting the internet and firing tickets.

Should I keep a printer if I install a KDS?

Many kitchens do, at expo, for packaging labels or as a backup station that can take over if a screen fails.

How long does it take a kitchen to adapt to screens?

Usually a few shifts. Start with one station, run printers in parallel for a week and agree timer thresholds with the cooks.

References

  1. National Restaurant Association (2025). From Trend to Transformation: Off-Premises Dining Now Essential for Restaurant Consumers, Operators (opens in a new tab) ↑

  2. National Restaurant Association (2025). From Trend to Transformation: Off-Premises Dining Now Essential for Restaurant Consumers, Operators (opens in a new tab) ↑

  3. National Restaurant Association (2026). Restaurants remain resilient despite challenging business conditions (opens in a new tab) ↑

  4. US Bureau of Labor Statistics (2025). Occupational Employment and Wage Statistics, May 2025 national estimate: Restaurant cooks median hourly wage (series OEUN000000000000035201408) (opens in a new tab) ↑

  5. US Food and Drug Administration (2004). Food Allergies (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo